| Content | This is the AFX 1972 Chevelle SS454 Silver/Black Mega G+ HO Slot Car
The ultimate muscle car, the Chevelle 454 ended its reign in 1972. In one word, the 454 was barbaric. Laying waste to lesser muscle cars of the time, including the Corvette. The 454 was the highest powered Chevelle ever manufactured in the model’s lifetime. Even now, 50 years later, folks still rank it top of the list. Only slightly changed from its predecessor the year before, the 1972 Chevelle came with a rear-facing Cowl Induction hood that allowed air into the engine so it could spread its proverbial wings.
Specifications
Chassis: Mega G+ LONG Wheelbase Chassis (1.7″)
Mega G+ Chassis
This chassis doesn’t just go faster or handle better than the competition. It wasn’t just built with the ultra-low, narrow dimensions of the original Mega G to continue the reign of the most realistic HO cars on earth. The Mega G+ Chassis is smoother, more consistent, and more intuitive than any car we’ve ever built.
Includes
One AFX 1972 Chevelle SS454 Silver/Black Mega G+ HO Slot Car | This is the Traxxas X-Maxx 4WD 8S Brushless Ready-to-Race Monster Truck COMBO with TWO 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger.
The new 8S X-Maxx has been beefed up with Belted Sledgehammer Off-Road Tires, Overdrive Gear Set, 15/54 Stock Gearing and Included 17/46 Speed Gearing.
Get Ready to Experience the Most Powerful Ready-To-Race Monster Truck on the Planet!
Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough.
SIZE WINS
At the end of the day, size always wins. X-Maxx plows over obstacles and muscles through extreme terrain that leaves lesser trucks stranded. Mammoth 8-inch tall tires, long-arm suspension, and huge ground clearance dwarf the surroundings for virtually unstoppable monster truck fun.
EXTREME POWER
At Traxxas, too much power is never enough! The durability of the VXL-8s is matched only by the sheer ferocity of its 8s 30+ volt dual LiPo muscle. The speed-tuned 1200XL Big Block motor propels X-Maxx with brutal authority and exacting quickness that warps your senses. No matter what you have driven in the past, nothing will prepare you for X-Maxx.
BELTED SLEDGEHAMMER TIRES - ULTIMATE OFF-ROAD TRACTION
Proven Sledgehammer tread pattern provides maximum traction across a variety of surfaces. Traxxas belted tires resist ballooning to provide ultimate stability at high speeds from the mud to the pavement.
EXCLUSIVE SELF-RIGHTING
Before X-Maxx, monster trucks would sometimes roll over upside down, bringing the action to a screeching halt. Now, press a button and in most cases this exclusive patent-pending Traxxas innovation flips X-Maxx back over onto its wheels so that you can quickly get back to having fun.
TRAXXAS STABILITY MANAGEMENT
Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. It can be dialed from completely off to 100%, and anywhere in between, right from the TQi transmitter!
MAXX-DUTY DRIVETRAIN
X-Maxx puts the power to the ground through tough all-steel drivetrain gears, the revolutionary Cush Drive system, and our strongest driveshafts ever. The Torque-Biasing Center Drive improves driveline durability and drives larger module ring and pinion gears on the toughest differentials we have ever produced.
Features
- VXL-8s Waterproof Electronic Speed Control
- 8s LiPo compatible
- Built-in cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 kV
- 5 mm output shaft
- Aluminum slip-on heat sink
- Dual motor cooling fans
- 50+ MPH with Two 4s LiPo Batteries and Included Optional Spur Gear
- Traxxas Stability Management (TSM)
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- BEC Voltage and Motor Temperature Sensor installed
- Clipless Body Mount System
- Quick one-hand installation and removal
- Uses pivoting rear latch mechanism
- Eliminates body posts and clips
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- All-metal gears and CVDs
- Overdrive gearing pre-installed
- Torque-Biasing Center Drive absorbs shocks and distributes power
- 24 mm splined wheel hexes
- Wheel hexes retained with a clip
- 17 mm hex on outside of wheel
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Splined outdrives attached with external thru-bolt method
- Heavy-duty Cush Drive with steel spur gear
- Fully machined aluminum stub axles
- Splined aluminum center driveshaft
- Heavy-Duty Fixed Motor Mount
- Precision, preset gear mesh adjustments
- No manual gear mesh adjustments are required
- Motor retention separate from gear mesh
- Heavy-Duty Modular Composite Chassis
- Interlocking front and rear bulkheads
- Motor mounts to rear bulkhead to eliminate gear crunching flex
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- Clipless Battery Retention System
- No body clips or hook and loop straps
- Battery hold-downs pivot for easy access
- Adjustable for battery size
- More secure than conventional retention systems
- Integrated into chassis top brace for improved battery tray and chassis stiffness
- Bumpers
- Front energy absorbing rubber impact bumper
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Heavy-Duty Steering Bell Cranks and Servo Saver
- High-output steering servo
- Wired directly into the RX box, no external wires seen on chassis
- New mounting system to fully support case
- Double-shear, bearing supported servo horn
- Suspension
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
- High strength steel suspension pins used throughout
- Suspension pins retainers won’t come loose or “back-out”
- 4 mm machined pivot balls
- C-hub and steering block geometry maximizes steering angle
- Adjustable roll center
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- Full contact sealed bearings used in exposed locations
- Large-Scale GTX Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2 mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Fixed shock locations
- Lower spring perches bolted on
- Wheels/Tires
- Massive 8.4″ Sledgehammer belted tires
- Virtually eliminates ballooning at high speeds
- Open tread block design
- 2-piece foam insert
- High-strength glue and bead design
- Large, dual-diameter wheels
Specifications
Weight: 19.1 pounds (8.66 kg)
Length: 30.67 inches (779 mm)
Width: 21.3 inches (540 mm)
Front Track: 21.3 inches (540 mm)
Rear Track: 21.3 inches (540 mm)
Height: 13.99 inches (355 mm)
Wheelbase: 18.92 inches (480 mm)
Center Ground Clearance: 4.2 inches (107 mm)
Drive System: Shaft-driven 4WD
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2085X metal gear ultra-high-torque waterproof
Radio System: TQi 2.4 GHz 2-channel transmitter with wireless module
Battery Compartment Specs: 197 mm X 52 mm X 44 mm
Motor: Velineon 1200XL
Motor Type: 1275 kV sensorless brushless
Motor Weight: 23.44 ounces (665 g)
Motor Length: 4.32 inches (110 mm)
Motor Diameter: 1.88 inches (48 mm)
Motor Shaft Size: 5 mm
Motor Connector Type: 6.5 mm bullet connectors
ESC: Velineon VXL-8s
ESC Type: Brushless
ESC Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
ESC Weight: 7.60 ounces (215.5 g)
Motor Connectors: 6.5 mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
ESC Power Wire: 10 gauge Maxx Cable
Model Type: Monster Truck
Model Speed: 50+ mph with two 4s LiPo batteries and optional pinion gear
Model Skill Level: 6
Requires
(4) AA batteries for the transmitter
| This is the Traxxas Slash 1/16 4x4 Short Course Ready-to-Run RC Truck with TQ 2.4 GHz radio system, Titan 12T 550 motor, XL-2.5 electronic speed control, 7.2 volt NiMH iD battery, 2-amp USB-C fast charger, and ProGraphix race replica painted body.
Slash 4X4 Performance in 1/16 Scale
The Traxxas Slash 4X4 set the standard for short-course fun and versatility with speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing in 1/16 scale Titan 550 power. At 14 inches long, the 1/16 Slash 4X4 is about half the size of the 1/10-scale Slash 4X4, but don't call it a "mini". This is a whole new category of RC performance and fun that no mere mini-model can match. Beneath the tough Race Replica polycarbonate shell, you'll find sophisticated suspension technology and chassis design with the quality and durability you expect from Traxxas.
Battery and Charger Included!
1/16 Slash includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Modified Muscle
Leave it to Traxxas to put the huge torque of the Titan 550 motor into the 1/16 Slash for incredible acceleration and monster power. The Titan 12T motor delivers exciting performance with long-lasting performance. An integrated cooling fan pulls cool air through vent tunnels molded into the motor plate to keep temperatures down. The XL-2.5 electronic speed control comes standard with three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance.
Features
- Race Replica ProGraphix Painted Body
- 1/16 Scale pre-painted body with applied decals
- Scale dimensions and looks of actual short course race trucks
- Scale front and rear tube-style bumpers
- Waterproof XL-2.5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- High-capacity heat sink
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 modified motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
- Includes Battery and USB-C Charger
- 2-amp USB-C fast charger
- 1200 mAh Traxxas 6-cell 7.2 V NiMH battery with iD
- Fiber-Composite Monocoque Chassis
- Low-CG design for improved handling
- Tough skid plates for driveline protection
- All electronics securely fastened to chassis
- Dual Integrated Battery Compartments
- Quick-release battery doors for fast pack changes
- Intake and exhaust cooling vents keep battery temperatures down
- Accepts 1/16 scale NiMH and LiPo batteries
- Transmission and Driveline
- Full-time shaft-driven 4WD
- Sealed heavy-duty transmission
- Adjustable slipper clutch
- Sealed, silicone-filled differentials with steel gears
- Heavy-duty telescoping U-joint driveshafts
- Steering
- Digital waterproof Traxxas 2080 steering servo
- Servo horn with integrated servo saver
- Suspension
- Twin-arm pivot ball suspension
- Progressive rocker-arm damping for extreme travel
- Captured rod ends won't pop off
- Springs and Shocks
- Inboard fully adjustable oil-filled GTR shocks
- Adjustable pre-load collars
- Red powder-coated springs
- Wheels and Tires
- Pre-glued all-terrain tires with high-performance foam inserts
- Satin chrome 5-spoke beadlock style wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
- Unparalleled Traxxas support parts availability
Revo-Spec Suspension
The unique Revo-spec suspension geometry multiplies the suspension travel to lengths normally found on larger models. It provides true progressive rate performance that's light over the small bumps and instantly tightens when compressed to resist bottoming out over large jumps.
3-channel Micro Receiver with Fail-Safe Security
The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.
Waterproof Electronics
Mud. Water. Snow. 1/16 Slash 4X4's waterproof electronics and fully sealed receiver box let you make tracks in conditions that leave other trucks parked at home. The antenna and servo wires route neatly through a special watertight seal. To protect the receiver from dust and water a custom shaped blue O-ring seals the receiver box.
Oil-Filled GTR Shocks
1/16 Slash 4X4 's super-smooth oil-filled shocks damp the suspension and maintain control no matter how rugged the terrain. They are fully tuneable and include pressure bladders for air/oil separation and threaded spring pre-load collars for quick ride height adjustments.
Ball-Bearing Transmission With Torque Control Slipper Clutch
1/16 Slash 4X4's high-efficiency, heavy-duty transmission is built for brushless power when you're ready to Power Up. An adjustable slipper clutch lets you tailor power delivery to suit the terrain and your driving style, and turns every watt of Titan power into pure performance.
Full-Time 4WD With Sealed, Silicone-Filled Differentials
Sealed, silicone-filled differentials resist "unloading" for superior performance and authentic handling as you drift the 1/16 Slash 4X4 through corners with precision and control. The viscosity of the differential fluid has been carefully tuned for exciting on-road performance, and the shaft-driven 4WD system delivers instant acceleration with proven efficiency and durability.
Digital High-Torque Waterproof Steering Servo
Small but powerful, the 1/16 Slash 4X4's 2080 servo cranks out 41.7 oz.-in. of tire-turning torque with digital circuitry for responsive control—even in water, mud and snow, thanks to its o-ring-sealed waterproof construction.
All-Terrain Tires & Wheels
Each corner of the 1/16 Slash 4X4 comes wrapped in all-terrain tires, pre-glued and mounted onto beadlock-style wheels. The tires deliver the perfect balance of forward traction and side bite on asphalt, dirt, and any other surface you throw at them. 12 mm mounting hexes open the door to additional wheel and tire combos to tune traction for specific surfaces.
Dual Battery Compartments
The 1/16 Slash 4X4 unleashes its full speed potential with the included Power Cell battery pack, but for extended run time and more "punch," the chassis' dual battery compartments let you add a second NiMH battery pack and parallel connector (both sold separately) to double the available battery capacity.
Specifications
Length: 14 inches (356 mm)
Front Track: 7.3 inches (185 mm)
Rear Track: 7.3 inches (185 mm)
Weight: 35 ounces (1000 g)
Height (overall): 4.92 inches (125 mm)
Wheelbase: 8.1 inches (206 mm)
Front Shock Length: 48 mm
Rear Shock Length: 48 mm
Front Tires (pre-glued): All-terrain 1.6″
Rear Tires (pre-glued): All-terrain 1.6″
Front Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Rear Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Electronic Speed Control: Waterproof XL-2.5
Motor (electric): Titan 12T
Transmission: Heavy-duty with steel idler gear
Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1)
Overall Drive Ratio: 7.32:1 (stock, out-of-box)
Differential Type: Hardened steel bevel, sealed
Gear Pitch: 48 pitch
Chassis Structure/Material: Molded composite Nylon monocoque
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: Traxxas TQ 2.4 GHz (2-Channel)
Skill Level: 1
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | This is the Traxxas Rustler XL-5 Ready-to-Run 1/10 Scale Electric Stadium Truck with the ID Battery and USB-C charger. The truck comes with the 3000mAh 7-Cell 8.4V flat battery pack with ID connector, 4-Amp USB-C fast charger, and waterproof electronics on the truck. These are great trucks for people new to R/C, and they are a great way for kids to get involved. This is one of the best beginner trucks we have and they are an unbelievable value. These make an excellent gift!
Traxxas Rustler XL-5
High Performance Stadium Truck
Traxxas Rustler sits low and wide for maximum high-speed stability, with fast reflexes and an agile feel not found on other trucks. New factory-installed heavy duty suspension components allow Rustler to push the performance envelope to the extreme with next-level durability. Rustler delivers power-sliding, full-throttle fun and a blistering 35+ MPH top speed in a Ready-to-Race package backed by Traxxas’ legendary innovation.
Traxxas Rustler XL-5 Now Includes
Extreme HD Components
Rustler delivers game-changing durability with its factory-installed Extreme Heavy Duty suspension components. Key components have been redesigned and beefed-up with extra material to ensure Rustler takes even the most brutal punishment in stride. From full-send sessions at the skate park to backyard bashing, no stadium truck delivers more thills than Rustler.
Clipless Body Mounting
Rustler's clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.
Features
- Clipless Stadium Truck Body
- Pre-painted body with applied decals
- Aggressive, aerodynamic body with rear wing
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- High-Performance Waterproof XL-5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 brushed motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- Extreme Heavy Duty Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- HD suspension arms
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Sealed watertight receiver box keeps the receiver dry
- Includes Battery and USB-C Charger
- 4-amp USB-C fast charger
- 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD
- Easy Access Battery Compartment
- Accepts NiMH 6 and 7-cell flat packs and hump packs
- Accepts 2-cell LiPo batteries
- Transmission and Driveline
- Brushless-ready Magnum 272 metal-gear transmission
- Torque-Control slipper clutch system
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- Heavy-duty telescoping U-joint driveshafts and yokes
- Tough Fiber-Composite Monocoque Chassis
- Wide, low-profile design for increased stabilit
- Steering
- High-torque waterproof Traxxas 2056 steering servo
- Spring-loaded servo saver helps protect against impacts
- Suspension
- Durable solid camber links eliminate the need for adjustment
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder-coated springs
- Wheels and Tires
- Pre-glued Alias step-pin rear tires and ribbed front tires with performance foam inserts
- 2.8″ black six-spoke wheels with chrome beadlock trim
- Precision Hex Hardware
Modified Muscle
The Titan 12T 550 motor pumps out incredible power with an integrated cooling fan to keep temperatures down. The XL-5 Electronic Speed Control provides smooth, reliable power delivery with EZ-Set one-button setup and three different drive profiles.
Battery and Charger Included
Rustler includes a powerful 8.4 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 35+ mph top speed. Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Specifications
Length: 18.1 inches (445 mm)
Front Track: 12.25 inches (311 mm)
Rear Track: 12.25 inches (311 mm)
Weight: 59.6 ounces (1.69 kg)
Height (overall): 7 inches (178 mm)
Wheelbase: 11.4 inches (289 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Front Tires (pre-glued):Alias ribbed 2.8″
Rear Tires (pre-glued): Alias Step-Pin 2.8″
Front Wheels: 2.8″ Black and chrome 6-spoke
Rear Wheels: 2.8″ Black and chrome 6-spoke
Electronic Speed Control:XL-5 electronic speed control
Motor (electric): Titan 12-turn 550
Steering Servo: 2056 high torque waterproof
Transmitter: TQ 2.4 GHz radio
Receiver: 6519 TQ 3-channel
Gear Ratio (internal): 2.72 (final drive: 10.17)
Differential Type: Planetary
Gear Pitch: 48 pitch
Transmission: Magnum 272
Steering: Bellcrank
Chassis Type: Modified tub
Chassis Material: Composite Nylon
Top-Speed: 35+ mph**
Skill Level: 1
*Battery Tray Dimensions: 166 mm x 48 mm x 28 mm
Included Charger: Traxxas 4-amp USB-C fast charger
Included Batteries: Traxxas Power Cell 3000 mAh, 8.4 V, NiMH battery with iD
*Battery expansion kit available (3725X)
**With 7-cell battery and included optional 28-tooth pinion gear
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | McLaren MCL38 F1
The McLaren MCL38 is a Formula One car designed and constructed by McLaren under the direction of Rob Marshall to compete in the 2024 Formula One World Championship, in which it won the World Constructors' Championship.
Specifications
Chassis: Mega G+ LONG Wheelbase Chassis (1.7″)
Mega G+ Chassis
This chassis doesn’t just go faster or handle better than the competition. It wasn’t just built with the ultra-low, narrow dimensions of the original Mega G to continue the reign of the most realistic HO cars on earth. The Mega G+ Chassis is smoother, more consistent, and more intuitive than any car we’ve ever built.
Includes
One AFX 2024 McLaren MCL38 #4 FY Australian Grand Prix Mega G+ HO Slot Car | This is the Traxxas Sledge with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility.
The Traxxas Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, VXL-6s brushless power system, Belted Sledgehammer Tires and ProGraphix clipless body.
The new 6S Sledge has been beefed up with Belted Sledgehammer Tires and Color-Matched Blue, Red, Green, and Orange Aluminum Parts.
Belted Sledgehammer Tires
Explore Sledge’s top speed with confidence and control. New belted Sledgehammer tires provide more precise feel, with instant response to control inputs. Traxxas' belting process results in less tire distortion, allowing Sledge to feel even faster with a larger, more consistent contact patch on the ground.
Game-Changing Stability
Experience the full power of Sledge in a whole new way. Traxxas belted tires resist ballooning to provide ultimate stability and control at high speeds.
Geared For Belted Tires
With new belted tires, hardened steel 15/52 gearing is now standard to maintain the incredible speed and relentless acceleration Sledge is known for.
Color-Matched Aluminum
All-new graphics are available in four colors with color-matched aluminum chassis, shocks, wheel hubs, shock towers, tie bars, T-bar, and more.
Features
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor length
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
- GT-Maxx Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Multiple mounting points for suspension tuning
- Chassis
- 3.2 mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick aluminum T-Bar for added rigidity
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- Clipless ProGraphix Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Steering
- Waterproof 2275 metal gear servo
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Wheels and Tires
- Huge 6.7″ Sledgehammer all-terrain tires
- Belted carcass resists ballooning
- Tough 3.8″ black wheels
- Splined 17 mm aluminum axle hubs
*Click to See the Full Line of Parts/Accessories
SPECIFICATIONS
Length: 23.78 inches (604 mm including wing)
Width: 18.10 inches (459 mm)
Front Track: 18.10 inches (459 mm)
Rear Track: 18.10 inches (459 mm)
Height: 8.43 inches (214 mm)
Wheelbase: 15.10 inches (384 mm)
Center Ground Clearance: 1.95 inches (50 mm)
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2275 digital metal-gear waterproof (347 oz-in)
Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver
Battery Compartment Specs: 181 mm X 54 mm X 45 mm
Model Speed: 70+ mph with 6s LiPo battery and optional gearing*
**Optional Gearing Need for Top Speeds:
65+ - 16-T Pinion / 52 Tooth Spur (TRA6489X & TRA9652)
70+ - 18-T Pinion / 46 Tooth Spur (TRA6491R & TRA9651)
Model Skill Level: 4
Scale: 1/8
Weight: 12.74 lbs (5.77 kg)
REQUIRES
(4) AA alkaline batteries for the transmitter. |
Be the first to review “AFX 1972 Chevelle SS454 Silver/Black Mega G+ HO Slot Car”