Content | This is the AFX Sauber F1 #24 C44 Stake FY Mega G+ HO Slot Car
AFX Exclusive Limited Edition Sauber F1 Collection.
Sauber F1 C44 #24 FY
Introducing the new Sauber F1 C44 #24 FY with an official license from Sauber Motorsport,
AFX used the sponsor logos, livery details and body specs of the real life cars to create the
most realistic HO scale version possible.
The Swiss company, Sauber Motorsport, shot off the starting line when it was founded in 1970.
After its debut in F1 in 1993, Sauber carved out a name for itself. Not only were they one of the
few traditional, privately held teams in the sport, they set standards in the design, development
and construction of race cars to this day.
Sauber Motorsport conducts full and model-scale testing in the factory’s state-of-the-art wind
tunnel providing ground-breaking innovation in the field of aerodynamics. The company’s
evolutionary skill and artistry helped earn its induction into the exclusive club of teams to have
competed in more than 500 F1 races. In 2022, Sauber Motorsport celebrated 30 years in the
sport and continues to dominate both on and off the track.
These cars blow AFX’s already top-of-the-line detail and design rendering out of the water.
Their multifaceted logos and deeply sculpted bodies pushed the boundaries of car
construction to heights never before seen – much less attempted, at such a small scale.
The 2024 Sauber F1 C44 #24, driven by Zhou Guanyu alongside Stake 1 teammate Valtteri
Bottas in #77, is built with a lightweight carbon-fiber monocoque featuring a Ferrari-supplied
1.6L V6 turbo engine and a redline of 15,000 RPM. The C44’s most dramatic shift may be the
change from push-rod to pull-rod suspension, lowering the car’s center of gravity. That,
coupled with its aerodynamic features - revised sculpted sidepods and a complex front wing -
help maximize downforce while minimizing drag.
In 2024, Zhou Guanyu has solidified his reputation as a talented driver, showcasing strong
performances behind the wheel of the Sauber F1 C44. Zhou's resilience and racecraft have
enabled him to consistently challenge for points finishes, moving up the leaderboard with
increasing confidence. Zhou's future in Formula 1 looks promising as he pushes the limits of
the Sauber F1 C44. AFX honors the advanced technology and craftsmanship of the C44, from
its aerodynamic lines to the precise cockpit replica, making it a fitting tribute to both the car
and its driver.
Specifications
Chassis: Mega G+ LONG Wheelbase Chassis (1.7″)
Mega G+ Chassis
This chassis doesn’t just go faster or handle better than the competition. It wasn’t just built with the ultra-low, narrow dimensions of the original Mega G to continue the reign of the most realistic HO cars on earth. The Mega G+ Chassis is smoother, more consistent, and more intuitive than any car we’ve ever built.
Includes
One AFX Sauber F1 #24 C44 Stake FY Mega G+ HO Slot Car | This is the Traxxas X-Maxx 4WD 8S Brushless Ready-to-Race Monster Truck COMBO with TWO 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger.
The new 8S X-Maxx has been beefed up with Belted Sledgehammer Off-Road Tires, Overdrive Gear Set, 15/54 Stock Gearing and Included 17/46 Speed Gearing.
Get Ready to Experience the Most Powerful Ready-To-Race Monster Truck on the Planet!
Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough.
SIZE WINS
At the end of the day, size always wins. X-Maxx plows over obstacles and muscles through extreme terrain that leaves lesser trucks stranded. Mammoth 8-inch tall tires, long-arm suspension, and huge ground clearance dwarf the surroundings for virtually unstoppable monster truck fun.
EXTREME POWER
At Traxxas, too much power is never enough! The durability of the VXL-8s is matched only by the sheer ferocity of its 8s 30+ volt dual LiPo muscle. The speed-tuned 1200XL Big Block motor propels X-Maxx with brutal authority and exacting quickness that warps your senses. No matter what you have driven in the past, nothing will prepare you for X-Maxx.
BELTED SLEDGEHAMMER TIRES - ULTIMATE OFF-ROAD TRACTION
Proven Sledgehammer tread pattern provides maximum traction across a variety of surfaces. Traxxas belted tires resist ballooning to provide ultimate stability at high speeds from the mud to the pavement.
EXCLUSIVE SELF-RIGHTING
Before X-Maxx, monster trucks would sometimes roll over upside down, bringing the action to a screeching halt. Now, press a button and in most cases this exclusive patent-pending Traxxas innovation flips X-Maxx back over onto its wheels so that you can quickly get back to having fun.
TRAXXAS STABILITY MANAGEMENT
Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. It can be dialed from completely off to 100%, and anywhere in between, right from the TQi transmitter!
MAXX-DUTY DRIVETRAIN
X-Maxx puts the power to the ground through tough all-steel drivetrain gears, the revolutionary Cush Drive system, and our strongest driveshafts ever. The Torque-Biasing Center Drive improves driveline durability and drives larger module ring and pinion gears on the toughest differentials we have ever produced.
Features
- VXL-8s Waterproof Electronic Speed Control
- 8s LiPo compatible
- Built-in cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 kV
- 5 mm output shaft
- Aluminum slip-on heat sink
- Dual motor cooling fans
- 50+ MPH with Two 4s LiPo Batteries and Included Optional Spur Gear
- Traxxas Stability Management (TSM)
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- BEC Voltage and Motor Temperature Sensor installed
- Clipless Body Mount System
- Quick one-hand installation and removal
- Uses pivoting rear latch mechanism
- Eliminates body posts and clips
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- All-metal gears and CVDs
- Overdrive gearing pre-installed
- Torque-Biasing Center Drive absorbs shocks and distributes power
- 24 mm splined wheel hexes
- Wheel hexes retained with a clip
- 17 mm hex on outside of wheel
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Splined outdrives attached with external thru-bolt method
- Heavy-duty Cush Drive with steel spur gear
- Fully machined aluminum stub axles
- Splined aluminum center driveshaft
- Heavy-Duty Fixed Motor Mount
- Precision, preset gear mesh adjustments
- No manual gear mesh adjustments are required
- Motor retention separate from gear mesh
- Heavy-Duty Modular Composite Chassis
- Interlocking front and rear bulkheads
- Motor mounts to rear bulkhead to eliminate gear crunching flex
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- Clipless Battery Retention System
- No body clips or hook and loop straps
- Battery hold-downs pivot for easy access
- Adjustable for battery size
- More secure than conventional retention systems
- Integrated into chassis top brace for improved battery tray and chassis stiffness
- Bumpers
- Front energy absorbing rubber impact bumper
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Heavy-Duty Steering Bell Cranks and Servo Saver
- High-output steering servo
- Wired directly into the RX box, no external wires seen on chassis
- New mounting system to fully support case
- Double-shear, bearing supported servo horn
- Suspension
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
- High strength steel suspension pins used throughout
- Suspension pins retainers won’t come loose or “back-out”
- 4 mm machined pivot balls
- C-hub and steering block geometry maximizes steering angle
- Adjustable roll center
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- Full contact sealed bearings used in exposed locations
- Large-Scale GTX Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2 mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Fixed shock locations
- Lower spring perches bolted on
- Wheels/Tires
- Massive 8.4″ Sledgehammer belted tires
- Virtually eliminates ballooning at high speeds
- Open tread block design
- 2-piece foam insert
- High-strength glue and bead design
- Large, dual-diameter wheels
Specifications
Weight: 19.1 pounds (8.66 kg)
Length: 30.67 inches (779 mm)
Width: 21.3 inches (540 mm)
Front Track: 21.3 inches (540 mm)
Rear Track: 21.3 inches (540 mm)
Height: 13.99 inches (355 mm)
Wheelbase: 18.92 inches (480 mm)
Center Ground Clearance: 4.2 inches (107 mm)
Drive System: Shaft-driven 4WD
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2085X metal gear ultra-high-torque waterproof
Radio System: TQi 2.4 GHz 2-channel transmitter with wireless module
Battery Compartment Specs: 197 mm X 52 mm X 44 mm
Motor: Velineon 1200XL
Motor Type: 1275 kV sensorless brushless
Motor Weight: 23.44 ounces (665 g)
Motor Length: 4.32 inches (110 mm)
Motor Diameter: 1.88 inches (48 mm)
Motor Shaft Size: 5 mm
Motor Connector Type: 6.5 mm bullet connectors
ESC: Velineon VXL-8s
ESC Type: Brushless
ESC Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
ESC Weight: 7.60 ounces (215.5 g)
Motor Connectors: 6.5 mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
ESC Power Wire: 10 gauge Maxx Cable
Model Type: Monster Truck
Model Speed: 50+ mph with two 4s LiPo batteries and optional pinion gear
Model Skill Level: 6
Requires
(4) AA batteries for the transmitter
| Traxxas BIGFOOT Classic 2WD RTR RC Truck w/Battery & USB-C Charger
This is the Traxxas BIGFOOT Classic Ready-to-Run 1/10 Scale 2WD Electric Monster Truck, with ID 7-Cell 3000mAh 8.4VNiMH Battery Pack and 4-Amp USB-C Charger and clipless replica body. This high-powered version features the XL-5 waterproof electronic speed control (ECS) and a TQ 2.4GHz radio system. This monster truck is an excellent way to get started in R/C because they are simple to operate and easy to maintain, which means they don’t require a huge investment.
BIGFOOT NOW INCLUDES
Extreme HD Components
Built to be the ultimate off-road monster truck, BIGFOOT now features factory-installed Extreme Heavy Duty suspension components for game-changing durability. Key components have been redesigned and beefed-up with extra material to ensure BIGFOOT takes even the most brutal punishment in stride.
Clipless Body Mounting
BIGFOOT's clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.
Traxxas Bigfoot Classic Replica Details:
- Brilliant blue metallic paint gleams on the heavy-duty officially licensed F-100 Ford XLT Ranger body
- The beefy chrome front bumper, with replica winch and KC fog lights, is built Traxxas-tough
- The stunning chrome grill is authentic down to the smallest details with its light buckets and reflectors
- The realistic high rise dual-carb manifold secures firmly to the hood
- Chrome KC Lights straddle the massive chrome roll bar for that tough monster truck look
- Authentic “shaved” original monster truck tires ride on beautiful chrome rims
- The chrome rear bumper looks tough enough to tow a sled in a pulling competition
- Chrome body accents and authentic decals replicate the Original BIGFOOT No. 1 and its show-stopping looks.
BIGFOOT is The Original Monster Truck. In fact, this is the truck that started the monster truck phenomenon and brought car-crushing fun and excitement to fairgrounds and arenas everywhere.
Traxxas faithfully captures the spirit and classic look of BIGFOOT No. 1 in amazing detail with this fully licensed replica. Relive the thrill of your first monster truck event with this classic powerhouse.
Hammer the throttle for non-stop wheelies and crush the competition underneath its towering stance. Built Traxxas Tough for all-day fun, BIGFOOT comes out of the box fully assembled, waterproof, and Ready-To-Race.
F-100 Ford XLT Ranger: A Monster Truck Phenomenon
With a monster truck as legendary as the original BIGFOOT No. 1, Traxxas went all-in to create a replica body worthy of the BIGFOOT name. BIGFOOT wouldn’t be the same without thousands of stadium lights gleaming off its miles of chrome.
From the molded chrome bumpers to the KC lights on top of the chrome roll bar, BIGFOOT commands attention. The highly detailed, molded-chrome grill stands ready to feed the massive big block engine with its impressive high-rise, dual-carb manifold.
The brilliant blue metallic paint of the officially licensed F-100 Ford XLT Ranger body and authentic, original BIGFOOT No. 1 decals recapture the excitement of The Original Monster Truck. This is the BIGFOOT from Traxxas.
One look and you know it means business!
Traxxas BIGFOOT Monster Truck Tires Ride Rough and Die Hard
BIGFOOT is no shelf queen.
This original monster truck is built to fly over giant jumps and rip epic roosts with its massive tires. Based on the reliable strength and performance of the Traxxas 2WD Stampede, BIGFOOT No. 1 rides high and runs fast with 30+mph speed and ground-pounding durability.
The Titan 550 motor’s brute power makes this original monster truck a sure winner, and the waterproof electronics make the whole world your arena. Mud, rain, and snow won’t stop you!
The officially licensed F-100 Ford BIGFOOT arrives fully assembled and Ready-to-Race out of the box. Just charge up the battery and prepare for all-out excitement! BIGFOOT No. 1 is monster truck royalty with the excitement and driving fun that could only come from Traxxas.
Traxxas Stampede Lends Its Features to the BIGFOOT No. 1
The best-selling Stampede was the first high-performance monster truck and its legendary ruggedness has made the name synonymous with monster truck driving fun.
The BIGFOOT is packed with all the same features!
- Licensed BIGFOOT No. 1 Clipless Body
- Brilliant blue metallic officially licensed F-100 Ford XLT Ranger body
- Chrome front bumper with replica winch
- Chrome grille with light buckets and reflectors
- Replica high-rise dual-carb intake manifold
- Chrome roll bar with replica KC lights
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- Includes wheelie bar
- High-Performance Waterproof XL-5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 brushed motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- Extreme Heavy Duty Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- HD suspension arms
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Sealed watertight receiver box keeps the receiver dry
- Includes Battery and USB-C Charger
- 4-amp USB-C fast charger
- 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD
- Tough Fiber-Composite Monocoque Chassis
- Tall 4″ center ground clearance to drive over obstacles
- Easy Access Battery Compartment
- Accepts NiMH 6 and 7-cell flat packs and hump packs
- Accepts 2-cell LiPo batteries
- Transmission and Driveline
- Brushless-ready Magnum 272 metal-gear transmission
- Torque-Control slipper clutch system
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- Heavy-duty telescoping U-joint driveshafts and yokes
- Steering
- High-torque waterproof Traxxas 2056 steering servo
- Spring-loaded servo saver helps protect against impacts
- Suspension
- Durable solid camber links eliminate the need for adjustment
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder-coated springs
- Wheels and Tires
- Pre-glued high profile Terra-Groove shaved monster truck tires
- 2.2″ Deep dish mirror-chrome beadlock-style wheels
- Precision Hex Hardware
Today, the BIGFOOT No. 1 Stampede boasts a bold look, innovative features, and more power to boost the fun quotient even higher. Thanks to the increased horsepower; the extensive ground clearance; the ultra-tough suspension; the exclusive watertight receiver box; and the ease of use, Stampede will quickly become your favorite for all kinds of monster truck action.
Stampede is still the first name in high-performance, ready-to-race monster trucks.
Titan 12-Turn 550 Modified Motor
BIGFOOT comes with a powerful Titan 12T 550 modified motor with an internal cooling fan, an industry first for this class of truck. The Titan’s oversized armature (30% larger compared to 540-sized armatures) is equipped with 12-turns of pure copper wire for big torque and increased power-handling capabilities.
Lower-running temperatures are achieved with the integrated cooling fan. The Titan 12T requires very little maintenance and is designed for consistent torque and high speeds, without fading from run to run. Beyond the specs, the Titan 12T is made for rock crushing torque, hardcore wheelie launches, explosive jumping, and just about any other 4-wheel fun that demands real horsepower.
The BIGFOOT No. 1 is one monster truck that doesn’t know when to quit!
Crushing cars, catching big air, and popping wheelies have never been this much fun. There is no other monster truck that offers BIGFOOT No. 1’s unique style, capability, and reputation for durability.
When it comes to speed, the Titan 12-turn 550 modified motor, and racing-style Magnum 272 transmission, propel the Stampede to speeds over 30mph. The integrated cooling fan routes airflow through cooling channels that are molded into the motor plate, keeping the motor cool. A cooler motor delivers faster speeds, longer runtime, and extended motor life.
XL-5 Waterproof Electronic Speed Control
To harness the power of the 12-turn motor, Traxxas bolted in the high-performance, waterproof XL-5 electronic speed control. With ultra-smooth, high-frequency operation, and high-power handling capability, the XL-5 makes the BIGFOOT No. 1 as fast as it looks.
Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are typically reserved for high-end replacement units.
The XL-5 features a completely waterproof design, three throttle profiles, low voltage detection, Thermal Shutdown Protection, 4-8 cell NiMH and 2-cell LiPo compatibility, and built-in BEC. Its high-frequency operation, combined with ultra-low resistance, makes the XL-5 an efficient, ultra-smooth, and fully proportional speed control.
The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. An exclusive feature is the patented Training Mode, which reduces the overall power output of the XL-5 by 50%. This makes it easier for younger or newer drivers to develop their control skills before unleashing full-power operation.
7-Cell iD Battery Pack Included
The authentic BIGFOOT No. 1 includes a genuine Power Cell Battery Pack with iD connector to ensure you experience peak performance from your Traxxas model. Power Cell packs are optimized for free-flowing power and maximum punch with:
- Premium quality, low-resistance cells;
- Flexible, silicone-jacketed 12-gauge wire;
- Heavy-duty welded tabs;
- and Traxxas’ high-output, gold-plated, high-current connectors.
Precision assembly with individually wrapped cells and clear overwrap completes the Traxxas Power Cell package. With seven cells, BIGFOOT No. 1 has 8.4 volts of motivation for maximum speed.
4-Amp 6-7-Cell NiMH Charger USB-C
For quick, convenient charging, a 4-amp USB-C 40W Charger with iD (6-7 cell, 7.2-8.4 volt, NiMH) is included, maximizing runtime and minimizing downtime.
Terra Groove Tires and Beadlock-Style Chrome Wheels
Rugged tires, molded in a unique compound, provide maximum acceleration and great grip on a wide variety of surfaces including dirt, grass, pavement, and rocks. These tires were developed specifically for Traxxas monster trucks to emulate the “hand-carved” look of the full-size treads. Deep-dish wheels, with bead-lock detailing, complete the aggressive and authentic look.
Sealed Electronics Extend Your Driving Fun
Traxxas shocked enthusiasts with the release of exclusive, waterproof electronics in the E-Maxx. Sealed electronics provide the freedom to drive where you want to drive through water, mud, snow, and other wet-running conditions that wouldn’t have been possible before.
Now the Traxxas BIGFOOT No. 1 Stampede is Ready-To-Race with this waterproof technology. The XL-5 ECS and mini receiver are sealed against the elements giving you the freedom to go places you might not have thought possible. It opens up a whole new world of adventure and fun. Wet muddy tracks are no problem for BIGFOOT.
BIGFOOT No. 1 Innovative Performance Options
Precision TQ 2.4GHz Radio System Control
With the TQ 2.4GHz radio system, you just switch on a drive. There are no channels or frequencies to manage, so the focus is on having fun. The TQ’s ergonomic design is comfortable for all-day driving, and its sleek lines are enhanced by an internal antenna that is impervious to damage.
Training Mode
EZ-Set one-button setup makes it easy to adjust or change profiles. Traxxas’ exclusive patented Training Mode profile cuts total power output in half and leaves the brakes at full strength.
It’s the first controller of its kind that has a 50% power profile. Training Mode is designed for young or first-time drivers that want to learn the ropes before unleashing the full power of the mighty Titan 12T motor. This makes the BIGFOOT an awesome truck for drivers of almost any age or skill level.
The BIGFOOT No. 1 original monster truck comes fully loaded with innovative performance options. Battery removal is simplified by the quick-release, hold-down latch, and the fiber-composite chassis is designed for exceptional rigidity and enormous ground clearance, meaning the BIGFOOT rides high.
Furthermore, the factory-installed, planetary differential never needs adjusting! Just take the BIGFOOT out of the box, charge up a battery, and go have fun!
If you’re looking for an all-terrain monster truck that is perfect for monster bashing or wheelie-popping thrills, look no further.
The BIGFOOT No. 1 monster truck is all you need.
Traxxas BIGFOOT No.1 Specifications
Length: 18.1 inches (459 mm)
Front Track: 12.75 inches (324 mm)
Rear Track: 12.75 inches (324 mm)
Weight: 65.3 ounces (1.85 kg)
Height (overall): 9.5 inches (241 mm)
Wheelbase: 10.6 inches (270 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Front Tires: Terra-Groove 2.2″
Rear Tires: Terra-Groove 2.2″
Front Wheels: Bright chrome dish (dual profile)
Rear Wheels: Bright chrome dish (dual profile)
Electronic Speed Control: XL-5 electronic speed control
Motor (electric): Titan 12T 550 (12-turn)
Steering Servo: 2056 high torque waterproof
Transmitter: TQ 2.4 GHz radio
Receiver: 6519 3-channel micro
Gear Ratio (internal): 2.72 (final drive: 12.34)
Differential Type: Planetary
Gear Pitch: 48 pitch
Transmission: Magnum 272
Steering: Single point
Chassis Type: Modified tub
Chassis Material: Composite Nylon
Top Speed: 30+ mph**
Skill Level: 1
*Battery Tray Dimensions: 164 mm x 46 mm x 26 mm
Included Charger: 4-amp USB-C fast charger
Included Batteries: Traxxas 7-cell NiMH battery with iD
*Battery expansion kit available (3725X)
**With 7-cell battery and included optional 19-tooth pinion gear
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | This is the Traxxas Maxx Slash with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility.
The Traxxas Maxx Slash 6S 4WD Brushless Short Course Truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, Traxxas Stability Management (TSM), VXL-6s brushless power system, and ProGraphix clipless body.
SHORT COURSE SUPREMACY
Traxxas rocked the world 15 years ago with the release of the Slash, launching a short course revolution and a generation of enthusiasts that have propelled Slash to become the best-selling truck in RC. Now, Slash is going even bigger. Traxxas MAXXed the Power, Size, Durability, and Excitement!
6s Power
Maxx Slash punches harder and faster with brutal 6s power and 70+mph speed. Low center of gravity and new belted tires keep it all in control.
Maxx-Sized Slash
Being big is good. Being the perfect size for maximum performance is best. Maxx Slash is the perfect size to power aggressively over the roughest terrain imaginable, yet it is still feels light, responsive, and agile.
Maxx Strength
The Maxx platform has already proven it’s synonymous with durability. The engineering on Maxx Slash continues to innovate, adding even more strength for critical 6s power handling and faster, harder-hitting action.
Belted Tires
Maxx SC belted tires limit high-speed tire expansion for a larger, flatter contact patch and game-changing precision and control. Tire uniformity is critical for stability, especially at the top of its 70+mph speed range.
Features
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Patented Traxxas High-Current Connectors
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV brushless motor
- 5 mm output shaft
- Finned can for better heat dissipation
- Integrated motor cradle mount
- Supports entire motor
- Reduces flex for longer gear life
- TQi 2.4GHz High Output Radio System
- TQi 2.4 GHz transmitter
- TQi 2.4 GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- Clipless Body
- Quick and secure installation and removal
- Managed airflow for improved high-speed stability
- Rigid internal frame
- Additional nerf bar side support
- Eliminates body posts and clips
- Molded body reinforcements for tear-through protection
- Drivetrain
- Torque-Biasing Center Drive
- Absorbs shocks and distributes power
- Aluminum housing
- Full-time shaft-driven 4-wheel drive
- 17 mm keyed wheel hex with 5 mm nut
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Steel pinion and spur gear
- Heavy-duty Cush Drive
- Steel-Core hybrid telescoping driveshafts
- Splined aluminum center driveshaft
- Easy Battery Access
- Large battery compartment with secure snap-lock battery door
- Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3s LiPo batteries
- Batteries are protected deep in the chassis
- More secure than conventional retention systems
- Heavy-Duty Steering Bellcranks and Servo
- Large-scale high-output steering servo
- 285 oz-in of torque
- 0.18 sec transit speed
- Triangulated mounting system to fully support case
- Heavy-duty double-shear bellcranks
- Suspension
- Heavy duty double-shear suspension arms
- Tough composite formula resists impact damage, even in cold weather
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
- Steel pivot balls
- C-hub and steering block geometry maximizes steering angle
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- 70+mph with optional gearing and dual 3s LiPo batteries (sold separately)
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Modular Low-CG Composite Chassis
- Extended modular chassis design interlocks with front and rear bulkheads
- Absorbs and distributes impact energy
- Molded-in hex reinforcements on flat surfaces
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- GT-Maxx Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Lower spring perches bolted on
- Bumpers
- Heavy duty energy absorbing front and rear bumpers
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Adjustable wheelie bar with integrated carry handle
- Wheels and Tires
- Tough dual-profile wheels with keyed 17 mm hex receptor
- Large 5.3″ Maxx SC belted tires
- Limits tire expansion for game-changing performance
- 1-piece foam inserts
- Pre-glued and ready for action
Engineered for 6s Power
From its inception, Traxxas engineered Maxx Slash to incorporate all the hallmarks of the legendary Slash, but infused with massive 6s power. Belted Maxx SC tires amplify the short course experience with incredible traction and 70+mph stability. An all-metal drivetrain and Steel-Core hybrid driveshafts give Maxx Slash all the Traxxas-Tough durability that made Slash famous.
Aggressive Short Course Body
Maxx Slash retains the unmistakable short course body style of its Slash lineage but injects it with a healthy dose of high-horsepower adrenaline. Wide fenders and sculpted lines give Maxx Slash a more aggressive look while rugged body reinforcements keep it looking fresh after a rough day at the track.
Adjustable Wheelie Bar
With the hard-hitting punch of 6s power on hand, an adjustable wheelie bar is required. Maxx Slash's adjustable wheelie bar maximizes traction and control during full throttle acceleration. Set it low to prevent lift during full throttle acceleration on hard surfaces, or set it higher to serve as a transparent backstop during high-speed, high-flying off-road action.
Waterproof Electronics
Maxx Slash is not limited by mud, snow, or water and neither is your fun. A sealed box protects the TQi receiver from water for all-weather driving. An easy-access port on top allows instant access to the receiver while retaining the box’s waterproof integrity.
Maxx Steering Servo
The powerful steering servo mounts solidly to the Maxx Slash chassis for enhanced support and impact resistance. With its proven durability in MAXX monster trucks, the digital, ball bearing design delivers 285 oz-in of torque for responsive and precise steering control.
Optional Accessory Lighting
Built to handle brutal real-world punishment, the Maxx Slash LED Light Kit (part #10290) is waterproof and built Traxxas Tough for maximum fun. Blaze a path through the night with this high-output LED light kit. The included high voltage amplifier packs the muscle to efficiently power the high-power light bar with a tightly regulated output for stable lighting performance, without flickering or dimming as the battery voltage changes.
Heavy Duty Bumpers
Heavy-duty front and rear Slash-style bumpers help protect critical components from impacts. The bumpers, combined with a short course body that covers the tires, allow for fender-to-fender contact for competitive and authentic racing action.
Shock Tower Design
Maxx Slash's integrated shock towers are part of the chassis and produce a rigid, triangulated structure to mount and protect the shock caps. Heavy-duty body mounts secure directly to the reinforced shock towers for maximum strength and impact resistance.
Fixed Mesh Motor Cradle
The motor and cradle join together to form a fixed gear mesh. A heavily reinforced mounting plate in the chassis keeps the motor and spur gear in perfect alignment. This innovative solution eliminates flex and greatly extends gear life.
Low-CG Chassis
The new chassis lowers the center of gravity and extends the wheelbase for responsive handling. A fighter jet aesthetic wraps around an engineered truss design that builds in strength and rigidity where it's needed most. Proven-tough Maxx bulkheads are tightly integrated front and rear.
Torque-Biasing Center Drive
Maxx Slash's Torque-Biasing Center Drive is tuned for maximum punch off the line with heavyweight oil for even front/rear power distribution. A heavy-duty aluminum housing helps dissipate heat for consistent performance as Maxx Slash delivers unmatched throttle punch and unbelievably quick acceleration!
Specifications
Length: 26.52 inches (674 mm)
Front Track: 14.30 inches (363 mm)
Rear Track: 14.30 inches (363 mm)
Ground Clearance: 1.54 inches (39 mm)
Weight (no battery): 11.78 pounds (5.34 kg)
Height (overall): 9.64 inches (245 mm)
Wheelbase: 15.49 inches (394 mm)
Shock Length (front): 4.90 inches (124 mm)
Shock Length (rear): 4.90 inches (124 mm)
Tire Diameter: 5.27 inches (134 mm)
Wheel Diameter: 2.2 x 3.2 inches (56 x 81 mm)
Speed Control: Velineon VXL-6s
Motor (electric): Velineon 2000 kV Brushless
Overall Drive Ratio: 11.38:1 (25/50 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: Module 1.0
Chassis Structure/Material: Hex-reinforced nylon composite
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Double-shear bellcrank
Wheels & Tires: Dual-profile SCT wheels with Maxx SC belted tires & foam inserts
Radio System: 2-Channel, TQi 2.4 GHz Transmitter with TSM receiver
Servo: 2090 Waterproof (285 oz-in torque)
Top Speed: 70+mph with two 3s LiPo batteries and optional gearing (sold separately)
Skill Level: 4
Battery Tray: (L/W/H): 181 x 56 x 45 mm
Requires
(4) AA alkaline batteries for the transmitter | This Combo Includes:
Traxxas Stampede 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Stampede 4X4 VXL Brushless Ready-to-Run Waterproof Monster Truck Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Upgrade Kit, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix body.
Battery and charger are sold separately.
Stampede 4X4 VXL - BACK WITH A VENGEANCE
Stampede 4X4 VXL is back--bigger and stronger than ever before! Backed by the massive torque of the Velineon 540XL motor, Stampede muscles its way over the toughest obstacles and reaches speeds of 60 mph and beyond. Stampede 4X4 comes outfitted to shred any terrain with the strength of Traxxas’ Extreme Heavy Duty Upgrade Kit and aggressive grip of its huge 5.3″ Sledgehammer tires. Drive harder, go faster, hang tougher— nothing stops Stampede 4X4 VXL!
Hoss 4X4 VXL is now Stampede 4X4 VXL
540XL TORQUE
For those who believe “there’s no replacement for displacement,” Traxxas has built a monster truck for you. Stampede 4X4 VXL packs the same Velineon 540XL brushless motor found in the Maxx extreme monster truck. It’s the largest motor we’ve ever offered in a truck this size. The Velineon VXL-3s speed control rolls out the power smoothly utilizing large 6.5 mm connectors and an integrated cooling fan for fast, reliable fun.
EXTREME HEAVY DUTY UPGRADE KIT
Along with added power, Stampede 4X4 VXL also gets a massive boost in strength with its factory-installed Extreme Heavy Duty Upgrade Kit. The kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
EXTREME SLEDGEHAMMER GRIP
Stampede 4X4 VXL relies on huge Sledgehammer tires to put its massive torque to the ground. The 5.3″ tall Sledgehammers lift Stampede skyward for superior ground clearance and a menacing stance. The open-block tread design clears away mud and debris for unrivaled traction on loose surfaces. Sledgehammer tires come pre-glued with performance foam inserts and they’re TSM-rated for speeds of 60 mph and beyond!
Features
- Clipless Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Quick and easy removal
- Holds tight for intense action
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to
- 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-Function knob
- Patented waterproof receiver box with easy-access plug
- VXL-3s Waterproof Electronic Speed Control
- Cooling fan with large heat sink
- Three Programmable Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon 540XL Brushless Motor
- Long format brushless motor
- 4-pole 2400 kV
- 5 mm output shaft
- Precision-balanced rotor
- Brilliant blue-anodized finish
- Up to 60+ mph with 3s LiPo battery (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- Reinforced integrated wheelie bar
- High-approach bumpers
- Integrated nerf bars for side impact resistance
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive absorbs shocks and distributes power evenly
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Anodized-aluminum center driveshaft
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Tall 5.3″ Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Reinforced Front and Rear Bumpers
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows Stampede to climb up and over obstacles with ease. The rear bumper mounts a perfectly positioned wheelie bar to help prevent the Stampede 4X4 VXL from back-flipping under its explosive power.
Sledgehammer Tires and 2.8" Black Chrome Wheels
Large 5.3" Sledgehammer tires combine excellent ground clearance with true mud-slinging fun. The open-block tread design claws into gravel, dirt, and grass for sure-footed 4X4 traction on nearly any surface. The heavy-duty rubber compound is specially formulated to resist tearing and bonds exceptionally well to the aggressive black chrome wheels.
Modular Chassis
Stampede 4X4's modular design creates a chassis that's both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you'll have full access for easy service and adjustment.
Heavy-Duty Composite Arms
Molded from our toughest composite material, Stampede 4X4 VXL's heavy-duty suspension arms provide just the right amount of flex to resist breaking—even in cold weather! From skate parks to 10-foot ramps, these heavy-duty arms stand up to even the most punishing drivers for non-stop fun behind the wheel.
Ultra Shocks
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Waterproof Receiver Box
Stampede 4X4 VXL incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Stampede is ready for action!
Optimum-Geometry Steering with Integrated Servo Saver
A dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions. The integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Digital High-Torque Waterproof Steering Servo
Stampede 4X4 VXL's extreme speed and tall Sledgehammer tires require a steering servo that's both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control and quick reflexes.
VXL-3s ESC with Fan
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Chassis Nerf Bars
Rugged side nerf bars protect the chassis from rocks and other impacts. Special channels in the nerf bars support the sides of the body for a tighter, more secure fit.
Velineon 540XL Motor
A sensorless Velineon 540XL 2400 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
Fixed Gear Adapter
Fixed gear adapters take the guesswork out of setting your gear mesh. The fixed positioning keeps the gear mesh tight, even after the harshest landings. The innovative motor mount keeps the 540XL motor locked firmly in place with just a single screw for easy maintenance.
Heavy-Duty 4 mm Turnbuckles
Stampede 4X4 VXL's 4mm turnbuckles feature broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won’t pop apart during rigorous off-road pounding.
Maxx-Duty Driveshafts
Stampede 4X4 VXL's Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Steel-Gear Differentials
Sealed front and rear differentials utilize steel-gear internals for maximum durability. Silicone gaskets and X-ring seals allow you to tune the amount of locking action by varying the viscosity of the fluid inside the differentials.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Heavy-Duty Steel Spur Gear
Designed from the start to handle big brushless horsepower, Stampede 4X4 VXL's driveline uses a rugged steel spur gear with large 0.8 module/32-pitch teeth for reliability no matter how much power you pour on.
Specifications
Scale: 1/10
Length: 20.24 inches (514 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.75 inches (70 mm)
Weight: 6.3 pounds (2.9 kg) without batteries
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 5.3″ (133 mm) tall Sledgehammer
Wheels: 2.8″ (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 540XL brushless
Transmission: Single speed with Torque-Biasing Center Drive
Overall Drive Ratio: 10.99:1
Differentials: Sealed, 2-gear
Chassis: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 60+ mph with 3-cell LiPo and 23/50 gearing
Skill Level: 1
Battery Compartment: 162 mm x 47 mm x 26 mm *35 mm with optional battery strap (9026, sold separately)
Requires
(4) AA Batteries for transmitter
| This is the Traxxas Slash 1/16 4x4 Short Course Ready-to-Run RC Truck with TQ 2.4 GHz radio system, Titan 12T 550 motor, XL-2.5 electronic speed control, 7.2 volt NiMH iD battery, 2-amp USB-C fast charger, and ProGraphix race replica painted body.
Slash 4X4 Performance in 1/16 Scale
The Traxxas Slash 4X4 set the standard for short-course fun and versatility with speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing in 1/16 scale Titan 550 power. At 14 inches long, the 1/16 Slash 4X4 is about half the size of the 1/10-scale Slash 4X4, but don't call it a "mini". This is a whole new category of RC performance and fun that no mere mini-model can match. Beneath the tough Race Replica polycarbonate shell, you'll find sophisticated suspension technology and chassis design with the quality and durability you expect from Traxxas.
Battery and Charger Included!
1/16 Slash includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Modified Muscle
Leave it to Traxxas to put the huge torque of the Titan 550 motor into the 1/16 Slash for incredible acceleration and monster power. The Titan 12T motor delivers exciting performance with long-lasting performance. An integrated cooling fan pulls cool air through vent tunnels molded into the motor plate to keep temperatures down. The XL-2.5 electronic speed control comes standard with three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance.
Features
- Race Replica ProGraphix Painted Body
- 1/16 Scale pre-painted body with applied decals
- Scale dimensions and looks of actual short course race trucks
- Scale front and rear tube-style bumpers
- Waterproof XL-2.5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- High-capacity heat sink
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 modified motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
- Includes Battery and USB-C Charger
- 2-amp USB-C fast charger
- 1200 mAh Traxxas 6-cell 7.2 V NiMH battery with iD
- Fiber-Composite Monocoque Chassis
- Low-CG design for improved handling
- Tough skid plates for driveline protection
- All electronics securely fastened to chassis
- Dual Integrated Battery Compartments
- Quick-release battery doors for fast pack changes
- Intake and exhaust cooling vents keep battery temperatures down
- Accepts 1/16 scale NiMH and LiPo batteries
- Transmission and Driveline
- Full-time shaft-driven 4WD
- Sealed heavy-duty transmission
- Adjustable slipper clutch
- Sealed, silicone-filled differentials with steel gears
- Heavy-duty telescoping U-joint driveshafts
- Steering
- Digital waterproof Traxxas 2080 steering servo
- Servo horn with integrated servo saver
- Suspension
- Twin-arm pivot ball suspension
- Progressive rocker-arm damping for extreme travel
- Captured rod ends won't pop off
- Springs and Shocks
- Inboard fully adjustable oil-filled GTR shocks
- Adjustable pre-load collars
- Red powder-coated springs
- Wheels and Tires
- Pre-glued all-terrain tires with high-performance foam inserts
- Satin chrome 5-spoke beadlock style wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
- Unparalleled Traxxas support parts availability
Revo-Spec Suspension
The unique Revo-spec suspension geometry multiplies the suspension travel to lengths normally found on larger models. It provides true progressive rate performance that's light over the small bumps and instantly tightens when compressed to resist bottoming out over large jumps.
3-channel Micro Receiver with Fail-Safe Security
The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.
Waterproof Electronics
Mud. Water. Snow. 1/16 Slash 4X4's waterproof electronics and fully sealed receiver box let you make tracks in conditions that leave other trucks parked at home. The antenna and servo wires route neatly through a special watertight seal. To protect the receiver from dust and water a custom shaped blue O-ring seals the receiver box.
Oil-Filled GTR Shocks
1/16 Slash 4X4 's super-smooth oil-filled shocks damp the suspension and maintain control no matter how rugged the terrain. They are fully tuneable and include pressure bladders for air/oil separation and threaded spring pre-load collars for quick ride height adjustments.
Ball-Bearing Transmission With Torque Control Slipper Clutch
1/16 Slash 4X4's high-efficiency, heavy-duty transmission is built for brushless power when you're ready to Power Up. An adjustable slipper clutch lets you tailor power delivery to suit the terrain and your driving style, and turns every watt of Titan power into pure performance.
Full-Time 4WD With Sealed, Silicone-Filled Differentials
Sealed, silicone-filled differentials resist "unloading" for superior performance and authentic handling as you drift the 1/16 Slash 4X4 through corners with precision and control. The viscosity of the differential fluid has been carefully tuned for exciting on-road performance, and the shaft-driven 4WD system delivers instant acceleration with proven efficiency and durability.
Digital High-Torque Waterproof Steering Servo
Small but powerful, the 1/16 Slash 4X4's 2080 servo cranks out 41.7 oz.-in. of tire-turning torque with digital circuitry for responsive control—even in water, mud and snow, thanks to its o-ring-sealed waterproof construction.
All-Terrain Tires & Wheels
Each corner of the 1/16 Slash 4X4 comes wrapped in all-terrain tires, pre-glued and mounted onto beadlock-style wheels. The tires deliver the perfect balance of forward traction and side bite on asphalt, dirt, and any other surface you throw at them. 12 mm mounting hexes open the door to additional wheel and tire combos to tune traction for specific surfaces.
Dual Battery Compartments
The 1/16 Slash 4X4 unleashes its full speed potential with the included Power Cell battery pack, but for extended run time and more "punch," the chassis' dual battery compartments let you add a second NiMH battery pack and parallel connector (both sold separately) to double the available battery capacity.
Specifications
Length: 14 inches (356 mm)
Front Track: 7.3 inches (185 mm)
Rear Track: 7.3 inches (185 mm)
Weight: 35 ounces (1000 g)
Height (overall): 4.92 inches (125 mm)
Wheelbase: 8.1 inches (206 mm)
Front Shock Length: 48 mm
Rear Shock Length: 48 mm
Front Tires (pre-glued): All-terrain 1.6″
Rear Tires (pre-glued): All-terrain 1.6″
Front Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Rear Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Electronic Speed Control: Waterproof XL-2.5
Motor (electric): Titan 12T
Transmission: Heavy-duty with steel idler gear
Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1)
Overall Drive Ratio: 7.32:1 (stock, out-of-box)
Differential Type: Hardened steel bevel, sealed
Gear Pitch: 48 pitch
Chassis Structure/Material: Molded composite Nylon monocoque
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: Traxxas TQ 2.4 GHz (2-Channel)
Skill Level: 1
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block |
Be the first to review “AFX Sauber F1 #24 C44 Stake FY Mega G+ HO Slot Car”